-
Friday, February 10, 2012
Wisconsin Oven Corporation announced plans today to apply for a GSA Schedule and actively pursue additional federal contracts. Federal officials appreciate GSA Schedules as a means of procuring goods and services, knowing that companies on these schedules have been qualified by the General Services Administration (GSA).
-
Wednesday, October 19, 2011
Wisconsin Oven designed and manufactured a gas-fired heavy during box furnace to anneal spools of aluminum wire used in electrical cables. The heat treating furnace has total chamber dimensions of 14’6” wide x 13’9” long x 17’0” high and a maximum operating temperature of 800º F.
-
Friday, October 14, 2011
Wisconsin Oven designed and manufactured a gas fired three lane oven with an indexing cart drive system for curing coatings on various parts for wind turbines. The parts are a mix of steel and alloy with the largest weighing 300lbs. The industrial oven has a production rate of 40 carts per hour. The customer required a 25-point temperature uniformity of +/-15° F at 140° F.
-
Thursday, September 8, 2011
Wisconsin Oven designed and manufactured a steam heated walk-in batch oven to cure water based adhesive resin onto abrasives.
-
Monday, June 13, 2011
Wisconsin Oven designed and manufactured a gas-fired two (2) tier reciprocating drawer oven to heat felt sheets prior to molding for the automotive industry. The felt sheets are used by various automotive manufacturers for insulation in the floors, doors, and trunks of automobiles.
-
Monday, June 6, 2011
Wisconsin Oven designed and manufactured a gas-fired walk-in batch oven to cure composite material for the aerospace industry. The customer manufactures various parts for several aircraft manufacturers. The oven is divided into two (2) independent chambers that are separated by a vertical lift door which can be opened to combine the chambers for curing long parts.
-
Monday, April 18, 2011
Wisconsin Oven designed and manufactured a gas fired belt conveyor oven for a manufacturer of recycled metal bottles. The oven is designed to cure powder paint on aluminum water bottles. The curing conveyor oven has a production rate of 1,500 aluminum water bottles per hour.
-
Friday, March 4, 2011
Wisconsin Oven designed and manufactured an electrically heated walk-in batch oven to cure varnish on industrial transformer coils used in municipalities and large factories. Several transformer plates are wound together with copper wire and placed into a steel case to create the industrial transformers.
-
Tuesday, January 11, 2011
Wisconsin
Oven designed and manufactured a gas fired batch oven for a supplier of
specialty tubing and bar products. The industrial
oven is being used for hydrogen embrittlement relief of steel rods
for the automotive industry. The batch
oven has four (4) zones and a load capacity to heat 3,000 pounds of steel.
-
Monday, January 3, 2011
Wisconsin
Oven designed and manufactured a gas fired batch oven to cure composite parts
for the Air Force. The curing oven has chamber
dimensions of 8’0” wide x 10’0” long x 8’0” high and a maximum operating
temperature of 500º F and normal operating temperature of 250° F.
